 |
| Fixing the Tile Flashing |
Steps 11-21 |
|
 1-10 | 11-21 |
| Fit top cover |
Fit top cover part.
|
|
| Tile Flashing 11/21 |
 |
 |
|
|
|
|
| Tile Flashing 12/21 |
|
 |
|
|
| Install support batten |
Before fitting the top flashing section, it may be necessary
to fit a supporting batten.
|
|
| Tile Flashing 13/21 |
|
 |
|
|
| Fix top flashing |
Fix the top flashing section. It should sit tightly over the
existing top window cover part.
|
|
| Tile Flashing 14/21 |
|
 |
|
|
| Secure top flashing |
Screw top flashing section to the frame.
|
|
| Tile Flashing 15/21 |
|
 |
|
|
| Fasten flashing |
Fasten the flashing side parts to battens using clips provided. |
|
| Tile Flashing 16/21 |
|
 |
|
|
| Replace
tiles to the side |
Replace tiles up the side. It is recommended to slit the foam
slightly immediately above each tile. This prevents there being
a gap where the tile steps up.
 Click
for video |
|
| Tile Flashing 17/21 |
|
 |
|
|
| Ensure tiles fit |
You are likely to need to cut the tiles on one side of the frame
to make a perfect fit. Ensuring the gap is within the recommended
tolerances (30-60mm).
|
|
| Tile Flashing 18/21 |
|
 |
|
|
| Replace top tiles |
Replace top row of tiles, It may be necessary to cut the tiles
for a perfect fit. Mainatin the recommended tolerance between
the tiles and the frame (60-150mm).
|
|
| Tile Flashing 19/21 |
|
 |
|
|
| Replace
window |
Replace sash in frame. Make sure you support the frame firmly
before locating the hinge arms into the locking mechanism.
Click
for video |
|
| Tile Flashing 20/21 |
|
 |
|
|
| Job done |
That's it! You have now installed your roof window.
|
|
| Tile Flashing 21/21 |
|
 |
|
|
| Fixing the Tile Flashing |
Steps 11-21 |
|
 |
1-10 | 11-21 |
|
