 |
| Internal Preparation |
Steps 7-13 |
|
1-6 | 7-13 |
| Removing Insulation |
When removing insulation, if present, be sure to take appropriate
precautions by wearing a safety mask and, if necessary, goggles.
 Click
for video |
|
| Internal Preparation 7/13 |
 |
 |
|
|
| Removing a rafter |
If it is necessary to remove a rafter, it is important that
you consider the structural implications of doing so. If you
are uncertain, it is recommended that a professional opinion
be sought before proceeding further.
Click
for video |
|
| Internal Preparation 8/13 |
|
 |
|
|
| The bigger picture |
It is better to remove the surrounding area of boarding so that
you can see the big picture. |
|
| Internal Preparation 9/13 |
|
 |
|
|
| Cutting the rafter |
Be sure
to support the area below where you are cutting the rafter... |
|
| Internal Preparation 10/13 |
|
 |
|
|
| Locate rafters |
... and secure support beneath the top of the rafter. |
|
| Internal Preparation 11/13 |
|
 |
|
|
| Rafter edge |
You can then mark out, cut and remove the timbers. |
|
| Internal Preparation 12/13 |
|
 |
|
|
| Rafter edge |
Frame out the prospective opening to the correct height and width... |
|
| Internal Preparation 13/13 |
|
 |
|
|
| Internal Preparation |
Steps 7-13 |
|
 |
1-6 | 7-13 |
|
